PositionIt PI-35
For Mobile Applications
The PositionIt PI-35 by Will-Burt is a compact and robust pan and tilt positioner with a maintenance-free design. An IP68 rating delivers dust and water protection. Higher gear ratios generate lower speeds that provide smooth operation for optimal sensor and antenna performance.
Essential Features
- Strong lightweight construction
- Die-cast aluminum casing
- Pelco-D RS-485 communication
- Minimal backlash
- Precision turned and milled components with ball races on major axes
- Precision turned and milled components with ball races on major axes
- Absolute positioning
- Built to last
- Stainless steel fasteners
- Weatherproof
- IP 68 rating
- Simple to install
- External limit switch adjustment
- Universal mounting plate
- Suitable for most common payloads
- Corrosion resistant finish
- Black
- Regenerative braking
- On motor shaft
Specifications
| Model | PI-35 |
|---|---|
| Payload Capacity* | 35 ft lb / 47 Nm |
| Height | 9.7" / 246 mm |
| Width | 10.8" / 273 mm |
| Depth | 5.7" / 144 mm |
| Weight | 19.5 lb / 8.9 kg |
| Operating Temperature | -20°C to 50°C / -4°F to 122°F |
| IP Rating | 68 - Waterproof (immersion) and Dustproof |
| Pan Axis | 400° (± 200°) |
| Pan Speed (proportional) | 1 to 12° / second |
| Tilt Axis | 180° (± 90°) |
| Tilt Speed (proportional) | 1 to 12° / second |
| Backlash | ≤ 0.15° |
| Repeatability | ≤ 0.3° |
| Maximum Continuous Power | 44 W |
| Maximum Continuous Current | 1.85 amps |
| Input Voltage | 24 VDC - Converters available for 12 VDC and AC power sources |
| 2D Customer Drawing | 2D Customer Drawing |
*Capacity measured at 12 inches or less from the tilt axis. Dimensions and weights are for reference only and are subject to change. Contact Will-Burt for current engineering specifications.