Integrated Surveillance
A Long Distance Stunner for Sensitive Area Surveillance
The Slowspeed system is a complete high-resolution solution for users requiring a far higher degree of accuracy than is possible with a normal pan & tilt head and receiver. Delivering the capability of video tracking over long distances (dependent on lens), applications for the Slowspeed include airports and border control, harbors, vehicle embedded systems and other sensitive area surveillance.
Quick and easy to install, the receiver and housing are connected together by a single cable and the receiver can be controlled over a daisy chained or star wired RS422/485 network. System commissioning and diagnostics are performed via a local or remotely located display.
Utilizing a modified version of the 902 model from MAD’s housing range, the environmental enclosure is large enough to accommodate the equipment needed for the system’s long distance surveillance role, including full size CCTV lenses such as the Fujinon D60. The specialized electronics allow for extremely fine motor control to a resolution of 16 bits facilitating target tracking at long ranges.
Essential Features
-
Long range surveillance
- With 55-60x lenses
-
Ultra slow speed operation
- Pan and tilt speeds <0.1°/sec minimum to 10°/sec maximum
-
Choice of supply voltage
- Supply voltage either 110V ac or 230V ac
-
Choice of auxiliary output voltage
- Output voltage either supply voltage or 24V ac
-
Easy to install
- Plug and Play functionality
-
Exceptional accuracy
- Revolutionary preset technology with 16 bit resolution
-
Easy to set up
- Receiver mountable at base of polex
-
Wide choice of lenses
- Compatible with lenses with iris override and x2 converters up to 60x
-
Flexible
- Supports 14 different protocols
-
Active motor drive system
- Ensures head stays on preset positions
Specifications
| Specifications | |
|---|---|
| Power Supply | 230VAC or 110VAC |
| Max Load | 5A @ 230V (1150W) |
| Receiver Current Draw | Maximum of 100VA max |
| Fuses | Auxiliary fuse F2 5A T (20mm ceramic cartridge). Total max. pan/tilt/lens/24Vac auxiliary 100VA |
| Outputs | Auxiliary outputs for wash/wipe/lights (1000W max). Driven at supply voltage or 24V ac selectable by SW2 |
| Video Input | 1V p-p 75Ω terminated input via BNC socket |
| Video Output | 1V to 4V p-p 75Ω impedance via BNC socket. Video launch amplifier gain locally and remotely adjustable. Zoom and focus: adjustable between 6 - 12Vdc. Inching speed: adjustable between 0-12Vdc . 1 second inching built in |
| Lens Drive (Remotely Adjustable) | Iris output: direct drive for 3 motor lens or auto iris override voltage. In auto-iris mode output returns to preset level 15 seconds after manual iris control. Preset level is adjustable. Outputs have red/green LEDs to indicate direction and voltage |
| Presets Lens 10 Bit Resolutions Head 12 Bit Resolution |
Inputs for pan, tilt, zoom & focus preset feedback pots Up to 32 full scene presets: pan/tilt/zoom/focus (16 with BBV & Baxall up the coax protocols) |
| Alarm Facilities | 8 alarm inputs from volt free normally closed contacts. Output 1 normally closed volt free contact can be set to operate immediately or when the preset is approached after an alarm input NOTE: The output is used for iris override when using Fujinon or Pentax lens mode |
| Additional Facilities | Software random pan/sequential preset patrol with individual programmable preset dwell/Datum - return to preset 1, start preset patrol or random pan after menu set duration of inactivity |
| Features | LED readout for continual system status. Programming menu with in-built LCD display and screen display. 12V dc/500mA un-switched output. Colour coded outlets – live, neutral, earth, low voltage |