| Bowler Light Duty Pan & Tilt Head Specifications | Side mount | Over the top |
|---|---|---|
| Height (Standard) | 5.2 in. / 133 mm | 5.8 in. / 146 mm |
| Height (Continuous Rotation) | 17.4 in. / 441 mm | 18 in. / 457 mm |
| Width to platform face | 5.7 in. / 145 mm | 5.7 in. / 145 mm |
| Width to platform outer edge | 12.1 in. / 307 mm | N/A |
| Depth (without plugs) | - | - |
| Weight (Die cast aluminum - Standard) | < 5.1 lb. / 2.3 kg | < 5.1 lb. / 2.3 kg |
| Voltages | 24VDC | |
| Speeds (°/sec) | Pan 30,10 Tilt 10 |
|
| Capacity | 22.1 lb. / 10 kg (@ 30/10°/sec) | 13.2 lb. / 6 kg (@ 30/10°/sec) |
| Operational angles (°) | Pan: 350 Tilt: ±180 | Pan: 350 Tilt: -90 to +25 |
| Backlash | Less than 0.15° | |
| Long life potentiometers | Fitted as standard | |
| Control cable | Mating connectors supplied | |
| House color | Black or Grey | |
| Maintenance | None required | |
| Temperature range | -4° to 122° F / -20° to +50° C | |
| RX Integral Controller Card option | Bowler RX / Bowler Heavy Duty RX | |
| Voltages | 24VDC | |
| Interface / Protocol | RS232 or RS485 / Pelco-D & Pelco-P | |
| Addresses | Up to 256 | |
| Preset and tour | Dependent on controller | |
| Limit stops and braking | Electronic | |
| Auxiliary relay outputs | Wash, Wipe, Lights | |
| Power and data pass-through | for ‘block style’ camera | |