• English

PositionIt Positioners for Mobile Applications

PositionIt Positioners for
Mobile Applications

PositionIt models PI 150, PI 75 & PI 35 by Will-Burt are maintenance-free pan and tilt positioners designed to provide years of trouble free service. An IP68 rating delivers dust and water protection. The gear box is designed to minimize backlash and provides higher gear ratios for lower speeds along with mechanical braking. Long-life potentiometers are standard with PositionIt.

Essential Features

  • Replacement for MOOG QuickSet QPT Positioners
    • Direct connection to existing QuickSet control/power cable
  • Pelco-D RS-485 Communications
  • Strong lightweight construction
    • Die-cast aluminum casing
  • Minimal backlash
    • Precision turned and milled components with ball races on major axes
  • Built to last
    • Stainless steel fasteners
  • Weatherproof
    • IP 68 rating
  • Simple to install
  • Universal mounting plate
    • Suitable for most common payloads
  • Corrosion resistant finish
    • Black
  • Regenerative braking
    • On motor shaft
  • Flexible connection
    • Bottom or side
  • Long operational life
    • 2 year warranty on Will-Burt PositionIt Positioners
    • 3 year mechanical and electrical warranty on Static Positioners
  • We also offer a complete range of positioners for fixed applications and camera enclosures

Specifications

Model PI-150 PI-75 PI-35
Payload Capacity* 150 ft lb / 202 Nm 75 ft lb / 101 Nm 35 ft lb / 47 Nm
Height 11.32” / 287.7 mm 11.32” / 287.7 mm 9.8" / 248 mm
Width 12.4” / 314 mm 9.21” / 234 mm 10.8" / 273 mm
Weight 38 lbs. / 16.8 kg 33.5 lbs. / 15.2 kg 21 lb / 9.5 kg
Operating Temperature -20°C to 50°C / -4°F to 122°F
IP Rating 68 - Waterproof (immersion) and Dustproof
Pan Axis 400° (± 200°) 355° (± 177.5°)
Pan Speed (proportional) 0.02 to 6.5° / second 1 to 12° / second
Tilt Axis 180° (± 90°)
Tilt Speed (proportional) 0.02 to 5.5° / second 1 to 12° / second
Backlash ≤ 0.15°
Repeatability ≤ 0.3°
Maximum Continuous Power 44 W
Maximum Continuous Current 1.85 amps
Input Voltage 24 VDC - Converters available for 12 VDC and AC power sources
2D Customer Drawing 2D Customer Drawing 2D Customer Drawing 2D Customer Drawing

*Capacity measured at 12 inches or less from the tilt axis. Dimensions and weights are for reference only and are subject to change. Contact Will-Burt for current engineering specifications.
Contact Will-Burt

Need Assistance?

Corporate Office
+1.330.682.7015

Customer Service
+1.330.684.4000

Email Us

Will-Burt