Camera Housings
Made to a proven, traditional design, the Mitre range of environmental camera housings are extremely compact yet spacious enough (particularly the new 903) to accommodate larger camera/lens combinations.
Toughened glass and stainless steel fittings/fastenings ensure long operational life and two entry glands and a grommeted hole are provided for efficient cable management to secure the units’ IP66 integrity.
A deep base allows the fitting of an optional integral wiper which incorporates a micro switch for self-parking. Standard accessories include an extended camera plate, steel safety strap and wiring distribution block. A PTC resistor heater with progressive performance is also provided which eliminates the need for a thermostat and when the heat’s on, optional double skinned sunshields are available for all models. The roomy new 903 (standard length) can even be supplied with a fan cooled sunshield which draws air through the housing to prevent overheating in extreme conditions.
Essential Features
- Uncompromising construction
- Lightweight sheet aluminum or 316 stainless steel casing and tray
- New 903 series
- Extra height and width as standard plus short and integral cooling fan versions
- Deep bottom tray
- Suitable for housing integral wiper or accessories
- Built to last
- Stainless steel fasteners
- Weatherproof
- Sealed to IP rating 66
- Accessories
- Extended paxolin camera plate and stainless steel safety strap
- PTC Resistor heater
- Progressive performance without the need of a thermostat (available on request)
- Cable management
- Two entry glands at 20mm and one hole at 25mm for Kopex or Adaptaflex
- Integral wiper option
- Micro switch self parking wiper with blade toggle action
Specifications
| Specifications | 901 | 900 | 903 Standard | 903 Short | 902 |
|---|---|---|---|---|---|
| Height | 7.6 in. / 192 mm | 91. in. / 230 mm | 9.5 in. / 242 mm | 9.5 in. / 242 mm | 10.2 in. / 259 mm |
| Width over clips | 6.2 in. / 156 mm | 7.1 in. / 180 mm | 91. in. / 230 mm | 91. in. / 230 mm | 91. in. / 232 mm |
| Width over sunshield | 6.0 in. / 151 mm | 6.9 in. / 174 mm | 8.9 in. / 227 mm | 8.9 in. / 227 mm | 9.2 in. / 233 mm |
| Length over sunshield | 17.0 in. / 430 mm | 23.6 in. / 600 mm | 24.4 in. / 620 mm | 15.3 in. / 388 mm | 30.0 in. / 760 mm |
| Depth inside base | 2.2 in. / 55 mm | 2.2 in. / 55 mm | 2.3 in. / 57 mm | 2.3 in. / 57 mm | 2.2 in. / 55 mm |
| Weight (Aluminium without wiper) | < 5.5 lb. / 2.5 kg | < 7.7 lb. / 3.5 kg | 15.4 lb. / 7 kg | 8.8 lb. / 4 kg | < 13.2 lb. / 6.0 kg |
| Weight (Aluminium with wiper) | < 6.6 lb. / 3.0 kg | < 8.8 lb. / 4.0 kg | 16.5 lb. / 7.5 kg | 9.9 lb. / 4.5 kg | < 14.3 lb. / 6.5 kg |
| Weight (316 stainless without wiper) | 10.4 lb. / 4.7 kg | 18.1 lb. / 8.2 kg | N/A | N/A | N/A |
| Weight (316 stainless with wiper) | N/A | N/A | N/A | N/A | N/A |
| Base | 4 holes tapped M6 on 101.6 PCD (4”) square to base | ||||
| Platform | 4 slots 7.0 wide x 25 long in 225 long Paxolin or aluminium (903 units) plate (1 x ¼” UNC hex screw supplied) | ||||
| Voltage | 24VDC nominal | ||||
| Capacity (l x w x h) (in. / mm) | 13.0 in. x 4.5 in. x 4.3 in. / 330 x 114 x 110 mm | 20.1 in. x 5.5 in. x 5.7 in. / 510 x 140 x 145 mm | 19.9 in. x 7.0 in. x 6.6 in. / 505 x 178 x 167 mm | 10.8 in. x 7.0 in. x 6.6 in. / 273 x 178 x 167 mm | 25.6 in. x 7.1 in. x 6.7 in. / 650 x 180 x 170 mm |
| Options (all models) | Integral self parking wiper, internal fan, washer, thermostat, double skinned sunshield | ||||
| Heater | Progressive up to 32W | ||||
| Wiring and connections | Single row (double row with fan option), 12 way terminal block(s), .08 in. x .79 in. / 2 x 20 mm cable glands plus blanked, .98 in. / 25 mm hole for Kopex or Adaptaflex |
||||
| Recommended cable | 16/0.2 (rated at 230V for mains versions) | ||||
| House color (900 series) | Grey | ||||
| Temperature Range | -4° to 122° F / -20° to +50° C | ||||