• English

Specifications

Topper Medium Duty Pan & Tilt Head SpecificationsSide mountOver the top
Dimensions (mm nominal)
Height (Standard)
184201
Height (Continuous Rotation)493511
Width to platform face190183
Width to platform outer edge366N/A
Depth (without plugs)130130
Slip ring (Continuous Rotation only)24 way with 4 contacts per ring. ( 240v AC 2Amps)
Weight (kg)
Die cast aluminum (Standard)
<6<6
Die cast aluminum (Continuous Rotation)<8<8
316 stainless steel11.711.7
Fixing centres (mm)
Base (Standard)4 holes tapped M6 on 4”(101.6) PCD plus
4 holes 6.35 Dia on 4”(101.6) PCD
Base (Continuous Rotation)4 holes 6.35 Dia on 4”(101.6) PCD
Platform4 holes 6.5mm dia. on 101.6mm (4’’) PCD/square
4 holes 6.35mm dia. on 101.6mm (4’’) PCD/diamond
4 slots, 6.35mm wide x 30mm long in pairs
in line with camera axis
Voltages12VDC, 24VDC nominal, 24VAC, 110VAC, 240VAC
Speeds (°/sec)AC: Pan 3, 6, 12 / Tilt 3, 6
DC: Pan 12, 18, 24, 32, 48 / Tilt 12, 18
Capacity (kg)
Important: maximum load can only be achieved
by using a slow speed gearbox at certain speeds
and a balanced load. Contact MAD for details
2516
Operational angles (°)
Pan350350
Tilt-90 to +25 ±180
BacklashLess than 0.15°
Long life potentiometersFitted as standard
Control cableMating connectors supplied
House colorGoose Grey, Textured, (BS4800 00 A05)
MaintenanceNone required
Temperature range (°C)-20 to +50 (heater available)
Environmental housing compatibility
RX Integral Controller Card optionTopper RX
Voltages12VDC, 24VDC
Interface / ProtocolRS232 or RS485 / Pelco-D & Pelco-P or ASCII
AddressesUp to 256
Preset and tourDependent on controller
Limit stops and brakingElectronic
Auxiliary relay outputsWash, Wipe, Lights
Power and data pass-throughfor ‘block style’ camera
Contact Will-Burt

Need Assistance?

Corporate Office
+1.330.682.7015

Customer Service
+1.330.684.4000

Email Us

Products
Will-Burt