• English

Specifications

Homburg Heavy Duty Pan & Tilt Head SpecificationsSide mountOver the top
Dimensions (mm nominal)
Height (Standard)
234250
Height (Continuous Rotation)N/AN/A
Width to platform face402N/A
Width to platform outer edge170170
Depth (without plugs)
Slip ring (Continuous Rotation only)N/AN/A
Weight (kg)
Die cast aluminum (Standard)
<12<12
Die cast aluminum (Continuous Rotation)N/AN/A
316 stainless steelN/AN/A
Fixing centres (mm)
Base (Standard)4 holes tapped M6 on 4’’(101.6) PCD
plus 4 holes 6.35 Dia on 4’’(101.6) PCD
Base (Continuous Rotation)N/A
PlatformKey hole slots on 4’’ PCD
Voltages12VDC, 24VDC, 24VAC, 240VAC
Speeds (°/sec)Pan 30, 10 / Tilt 10
Slowspeed Pan/Tilt: <0.1°/sec min. to 10°/sec max.
Capacity (kg)
Important: maximum load can only be achieved
by using a slow speed gearbox at certain speeds
and a balanced load. Contact MAD for details
5020
(30 or 25 with 1 or 2
load compensators)
Operational angles (°)
Pan350350
Tilt±180-90 to + 25
BacklashLess than 0.15°
Long life potentiometersFitted as standard
Control cableMating connectors supplied
House colorGoose Grey, Textured, (BS4800 00 A05)
MaintenanceNone required
Temperature range (°C)-20 to +50 (heater available)
Environmental housing compatibility
RX Integral Controller Card optionHomburg RX
Voltages12VDC, 24VDC
Interface / ProtocolRS232 or RS485 / Pelco-D & Pelco-P or ASCII
AddressesUp to 256
Preset and tourDependent on controller
Limit stops and brakingElectronic
Auxiliary relay outputsWash, Wipe, Lights
Power and data pass-throughfor ‘block style’ camera
Contact Will-Burt

Need Assistance?

Corporate Office
+1.330.682.7015

Customer Service
+1.330.684.4000

Email Us

Products
Will-Burt